CE205 Plastic Cube Molds
CE205 Econ-O-Cube Mold Plastic
The Econ-O-Cube molds casts 3 compression test cubes at one time in a diagonal arrangement. Mold and detachable base are held together by self-aligning thumb screws which ensure an even, tight fit. Engineered plastic mold separates into 3 pieces for ease of cleaning.
Molded to ASTM C109 dimensional tolerances
Shipping Weight: 2.2 lb (1kg); 0.2 cu.ft.
CE305 Rubber Tamper 6x1x1/2" (155x25x13mm)
CE210 Plastic Cube Mold 2x2x2"
This 3 gang mold is of parallel construction and produces specimens, which while not conforming to ASTM, seem to give satisfactory results. Mold is supplied in a kit that includes top and plastic tamper. A can of silicone mold release is offered as CE211.
CE215 Cube Maker Kit
Single use liners are used to make 2" cubes. In use the cured specimen contained in a thin plastic liner is lifted from the brass mold and the liner is stripped away. For an accurate strength test, the specimen is tested in an unbonded frame which consists of 2 stainless steel retainer cups and 4 polyurethane pads. Pads can be reused for about 300 tests. The kit includes a brass 3-gang mold, 27 liners, a plastic tamping rod and an unbonded capping set as previously described.
Shipping Weight: 12 lb (5.5kg); 0.5 cu. ft.
Cube Maker Kit Replacements
||Extra liner, case of 196
||Extra compression pads, pkg. of 4
||Retainer cups, stainless steel, set of 2 |
top to bottom:
Capping Set for CE215