site map

Product Information

Geotest Home

Customer Service


Geotest Catalog
Request Catalog



Contact Geotest


CE205 Plastic Cube Molds

CE205 Econ-O-Cube Mold Plastic
Molded to ASTM C109 dimensional tolerances

The Econ-O-Cube molds casts 3 compression test cubes at one time in a diagonal arrangement. Mold and detachable base are held together by self-aligning thumb screws which ensure an even, tight fit. Engineered plastic mold separates into 3 pieces for ease of cleaning.
Shipping Weight: 2.2 lb (1kg); 0.2 cu.ft.

CE305 Rubber Tamper 6x1x1/2" (155x25x13mm)

CE210 Plastic Cube Mold 2x2x2"

This 3 gang mold is of parallel construction and produces specimens, which while not conforming to ASTM, seem to give satisfactory results. Mold is supplied in a kit that includes top and plastic tamper. A can of silicone mold release is offered as CE211.

CE215 Cube Maker Kit

Single use liners are used to make 2" cubes. In use the cured specimen contained in a thin plastic liner is lifted from the brass mold and the liner is stripped away. For an accurate strength test, the specimen is tested in an unbonded frame which consists of 2 stainless steel retainer cups and 4 polyurethane pads. Pads can be reused for about 300 tests. The kit includes a brass 3-gang mold, 27 liners, a plastic tamping rod and an unbonded capping set as previously described.
Shipping Weight: 12 lb (5.5kg); 0.5 cu. ft.

Cube Maker Kit Replacements
CE215A Extra liner, case of 196
CE215B Extra compression pads, pkg. of 4
CE215C Retainer cups, stainless steel, set of 2

Related Items:

top to bottom:
Capping Set for CE215

This item is part of the following categories:

Other items in the cement cube molds category include:

CE190 Bronze Cube Molds
CE200 Stainless Steel Cube Molds
CE205 Plastic Cube Molds
CE215 Cube Maker Kit

Other items in the cement category include:

CE925-CE941 Compression/Flexure Fixtures
CE100 Water Retention Apparatus
CE112 Grout Sample Box (GSB)
CE116 Grout Volume Change Mold
CE124 Flow Cone Set
CE140 Prism Mold
CE155 Gage Studs
CE160 Length Comparator
CE170 Cement Bleeding Apparatus
CE175 Air Content Measure
CE200 Stainless Steel Cube Molds
CE205 Plastic Cube Molds
CE260 Blaine Fineness Apparatus
CE280 Wagner Turbidimeter
CE330 Cement Calorimeter
CE360 Vicat Apparatus
CE370 Automatic Recording Vicat
CE410 Mud Balance
CE415 Marsh Funnel Viscometer
CE480 Gillmore Needle Apparatus
CE400 Tube Sampler, Bulk
CE401 Tube Sampler, Package
U-1695 Heater Adapter Kit
CE500 Motorized Flow Tables
CE501 Hand Operated Flow Table
CE505 Flow Caliper
CE560 Plaster Extensometer
CE550 Emley Plasticimeter
CE551 Plasticimeter Plate
CE580 Air Entrainment Meter for Cement Mortar 1 liter
CE810 Compression Mold Set
CE825 Compacting Machine
CE830 Tamping Rod
CE840 Flexure Attachment
CE870 Soil-Cement Capper
CE117 Micrometer Depth Gauge
CE120 Micrometer Bridge Set
CE215 Cube Maker Kit
E-316 Cube Test Sand
S5835 Soil Cement Test for S5830
CE910 Compression and Flexure Tester
CE900 Compression Tester 500kN
CE450 Flexural Tensile Tester
U-1690 Mortar Mixer
CE581 Air Entrainment Meter for Masonry Cement 0.75 liter
CE190 Bronze Cube Molds
CE1200 Flame Photometer
CE130A Autoclave, Cement digital
E-260 Sample Ejector 20 Push
CE370access Automatic Vicat Accessories

Back to search page



[ Geotest Home | Customer Service | Documentation |
Geotest Catalog | Calendar | Contact Geotest ]
Geotest Instrument Corporation
241 S. Frontage Road., Suite 38
Burr Ridge,IL 60527 USA