site map

Product Information


Geotest Home

Customer Service

Documentation

Geotest Catalog
Request Catalog

 

Calendar

Contact Geotest

 

C-2461 Curing Room


Conforms to ASTM C511

The Geotest curing room is modular in design and can be sized as required usually in multiples of 4 feet. This curing room may be dismantled for storage or relocation. Panels lock together with a hex wrench fixture. Panels are 4 inch thick with foam insulation between mill embossed aluminum sheets. This produces an 'R' factor of about 42. An industrial, gasketed refrigeration door with a safety latch and interior light is included.

Because the curing room is so tight and well insulated, heat of hydration requires cooling. Therefore, besides the moisture system, an air conditioner is provided. The moisture system consists of a fogging unit which produces and maintains 100% relative humidity. The 100% relative humidity creates free moisture and a floor drain must be provided by the user. On special order, we can provide a floor and a drain for the curing room.

Geotest curing rooms conform to ASTM C511 by maintaining the temperature at 23°C ± 2°C and a relative humidity of 100% at al times. Although seldom needed, we can supply a heating unit that might be required in the event that there is a heating break down in the containment building or if the curing room is constructed outside in a climate where the temperature can drop to below 0°C.

Due to the special nature of this curing room, our price includes installation at the site with instructions as to proper usage and maintenance. Inside measurements are 96x48x96" high or as otherwise specified by the user. Besides a drain, user must provide a water supply and electrical hookup. This system operates on 110-120 VAC. 220-240 VAC is also available and recommended due to its greater economy in use.

To prove that the system fully conforms to ASTM C511, we often add C-2465 Moist Room Data Logger and Controller Kit.

 

Related Items:
U-2394 Curing Room Temperature Recorders


This item is part of the following categories:

Other items in the curing category include:

C-2369 Curing Tanks
C-2382 Curing Tank Circulator
C-2380 Curing Tank Heater
C-2410 Concrete Curing Box
C-2415 Deluxe Portable Curing Box
C-2441 Environmental Test Chambers
C-2405 Econ-O-Cure Curing Box
C-7600 Temperature Matched Curing System
C-2406 Cylinder Mold Transport Racks
C-2461 Curing Room
C-2465 Moist Room Controller

Other items in the concrete category include:

C-1352-C-1366 Compression Machine Accessories
C-0130 Digital Compression Tester,
675,000 lb (3000kN) Capacity
C-0110 Digital Compression Tester,
350,000 lb (1556kN) Capacity
C-0050 Cybertronic Digital Readout
C-2540G Concrete Vibrator, gas operated
C-2530 Pocket Tachometer
C-1300 Dual Frame Concrete Testing System 500,000 lb
C-0070 Hydraulic Pump
B1600 Asphalt/Concrete Mobile Mixers with 8´´ wheels
B1605 Asphalt/Concrete Stationary Mixer 5 gallon
B1600/5access Asphalt/Concrete Mixer Accessories
C-0300 Compression Testers for Low Resistance Materials
C-0200 Flexure Tester 33,700 lb (150kN) Digital
C-0100S Automatic Servo Controlled Compression Testers
C-0140 Digital Hi Cap Compression,
1,125,000 lb (5000kN)
C-2220 Single Use Cylinder Molds-Plastic
C-2230 Single Use Cylinder Molds-Cardboard
C-2200 Reusable Cylinder Molds-Steel
C-2206 Reusable Cylinder Molds-Plastic
C-2210 3-Gang 2x4´´ Mold
C-2226 Mold Stripper
C-1280 Universal Tensile/Compression Machine
C-1299 Plotter for use with C-1298
C-0120HS High Stability Compression Testers
C-1260 Printer
C-1295 Compression Accessories
C-1298 Extensometer 2´´ (50mm)
C-1710 Portable Beam Tester
C-2330 Cylinder Carrier
C-2348 Capping Ladle
C-2320 Cylinder Cappers
C-2352 High Strength Capping Compound
C-2334 Capping Set for 6´´ Cylinders
C-1500-C-1527 UNBONDED CAPPING
C-2300 Concrete Air Indicator
C-2301 Concrete Air Indicator Kit
C-2305 Roll-A-Meter
C-2305A Aluminum Roll-A-Meter
C-2304 Volumetair
C-2306 Pressure Meter
C-2311 Air Meter Calibrator, plastic
C-2312 Air Meter Calibrator, machined brass
C-2360 Slump Sets
C-2365 Concrete Workability Meter (CWM)
C-2355 Kelly Ball Apparatus
C-1820 Lightweight Test Hammer
C-1805 Calibration Anvil
C-1860 Rebar Locater (Metal Detector)
C-1927 Portable AC/DC Oscilloscope
C-1031A Concrete Compression Machine, 700,000 lb (3114kN) capacity
C-2000 Rapid Freeze-Thaw Apparatus
C-2003 Freeze-Thaw Specimen Molds
C-2010 Sonometer with Oscilloscope
Resonance Frequency Tester
C-0100 Digital Compression Tester,
300,000 lb (1233kN) Capacity
C-3050 Concrete Corrosion Mapping System
C-1930.1 Thermocouple Wire
C-3100 Permeability Tester
C-3120 Rapid Chloride Test Set
C-3130 Rapid Alkali Test Set
C-1720 Compressometer
S2520 PI Tape, concrete
C-1722 Compressometer-Extensometer
C-3200 Multi-Position Strain Gauge Sets
C-2380 Curing Tank Heater
C-2382 Curing Tank Circulator
C-2410 Concrete Curing Box
C-2415 Deluxe Portable Curing Box
C-2722-C-2739 Masonry Saw Accessories and Blades
C-2510 Hand Tow Concrete Mixer
C-2511 Vehicle Tow Concrete Mixer
C-2525 Vibrating Table 20x20´´
C-2540 Concrete Vibrator
C-2550 Unit Weight Measures (Yield Buckets), steel
C-2560 Unit Weight Measures (Yield Buckets), aluminum
C-2580 Initial Set Penetrometer
C-2582 Acme Penetrometer
C-2583 Mortar Penetrometer
C-2710 Heavy Duty Masonry Saw
C-2715/16 Holding Attachments (for Masonry Saws)

C-3499 Portable Core Drilling Machine, hand held gasoline
C-3500 Portable Core Drilling Machine, gasoline
C-3505 Portable Core Drilling Machine, electric
C-3520-C-3591 Core Drilling Accessories and Diamond Drill Bits
C-3602 Instant Moisture and Temperature Testers
C-3610 Concrete Moisture Encounter
C-3630 Moisture Encounter: Wood, Felt-Roofing, Dry Wall, Plaster, Brick
C-3640 Wood-Encounter
C-3645 Compact Moisture Meter for Wood
C-3650 Professional Wood Moisture Meter
C-3651-C-3655 Probe Meter Accessories for C-3645 and C-3650
C-3700 Hand Penetrometer
C-3760 Crackcase
C-4050 Digital Fault Meter
C-1940 Crack Width Gauge Monitors
C-6000 Traveling Beam Device
C-6000access Traveling Beam Accessories
C-6030 Pavement Profilograph Mechanical Recording
C-6040 Pavement Profilograph Computerized
C-7200 4-Cell Concrete Permeability
C-7220 2-Cell Large Permeability Apparatus
C-7600 Temperature Matched Curing System
C-7201 Sealing Devices
C-7215 Epoxy Resin, 5kg can
C-6500 Concrete Floor Tester
C-7501 Concrete and Non-metalic Coating Thickness Gages
C-7510 Mechanical Thickness Gages for Steel Coatings
C-2257 Beam Curing Cover
C-2239 Beam (Plastic) and Large Cube Molds
C-2240-C-2249 Beam (Steel) and Large Cube Molds
C-2224 Cylinder Wrap
C-2308 Type A Pressure Meter
C-3512 Kor-Mobiles
U-1031AC Digital Concrete Field Scale
U-1031A Digital Concrete Field Scale
C-2340 Compound Melting Pots
C-4020 Printer
C-4016 Software
C-4001-C-4010 Calibration Load Cell
C-0120 Concrete Compression Tester,
440,000 lb (2000kN) Capacity
C-0400 Digital Two Piston Low Capacity Compression/Flexure Tester
C-2541 Concrete Vibrator, larger head
C-05access Compression Machine Accessories including Software
C-0500 Mounting Stand
C-0510 Spacers
C-0520 Block Test Platen Set
C-0530 Universal Flexure Test Set
C-0540 Cube Test Apparatus
C-0550 Splitting Tensile Test Device
C-0560 Clay Block Flexure Device
C-2472 Humidifiers for Moist Rooms
C-0565 Flexure Device for Prisms, 40x40x160mm
C-0800 Concrete Compression Test Software
C-2461 Curing Room
C-6050 High-Low Detectors (Rolling Straight Edge)
C-3750 Crack Detection Microscope
C-2358 Slump Cone Test
C-2480 Turbo Oscillator
C-2369 Curing Tanks
C-1910 Windsor Pin System
C-1899 Windsor Probe System
C-0080 Concrete Compression Machine, Digital
C-1925A Pro Model Ultrasonic Tester
C-1800 Concrete Test Hammer
C-1810A Digital Concrete Test Hammer
C-4015 Universal Digital Display
C-4001 Calibration Load Cell System
C-1450 Concrete End Grinder
C-1946 Crack Width Automatic Measuring Apparatus
C-1942 Large Crack Monitoring, Digital System
C-2471B Humidifier 3 gallons/hour
C-1986 Concrete Thickness Gauge
C-1960 Crack Width Gauge
C-1962 Crack Depth Gauge
C-2465 Moist Room Controller
C-0101 Concrete Compression Machine, 275,000 lb (1225kN), all automatic
C-0102 Concrete Compression Machine, 350,000 lb (1556kN), all automatic
C-0100A Concrete Compression Machine, 280,000 lb (1230kN), all automatic

Other items in the *new category include:

SI-2513 Rotary Laboratory Sifter 8/12
C-0concrete Compression Machines
S2220 DigiShear™ Automated Direct Shear System
S2350 DigiShear™ Automated Direct Simple Shear System
C-0080 Concrete Compression Machine, Digital
B625 Automatic Pensky-Martens Closed Cup Flash Point Tester
C-2461 Curing Room
C-2472 Humidifiers for Moist Rooms
C-1960 Crack Width Gauge
C-1962 Crack Depth Gauge



Back to search page

 

 


[ Geotest Home | Customer Service | Documentation |
Geotest Catalog | Calendar | Contact Geotest ]
Geotest Instrument Corporation
241 S. Frontage Road., Suite 38
Burr Ridge,IL 60527 USA
sales@geotestusa.com
http://www.geotestusa.com